This post and photos may contain Amazon or other affiliate links. If you purchase something through one of these links, I may receive a small commission at no additional cost to you. Any materials used may be provided to me free of charge, however all projects and opinions are my own.
Today I’m going to show you how to press a DTF transfer onto a t-shirt. If you’re interested in DTF printing and want to know how to use it even if you don’t own a DTF printer, I’m happy to help.
This tutorial is all about pressing DTF transfers, not about using a DTF printer or printing your own designs. If you want to learn more about DTF printers, my Beginner’s Guide is a good place to start.
You can watch Cori and I go through the entire DTF transfer process by pressing play on the video below.What is a DTF transfer?
DTF stands for Direct to Film. DTF is different from sublimation because it can be used on any type of fabric and in any color. True DTF prints contain white ink, so they can be applied to any color of fabric, even dark colors. DTF ink is also opaque, so the fabric doesn’t show through the print.
DTF sits on top of the fabric and does not become part of the fabric like sublimation does. I find that DTF prints feel really nice, they are thinner than HTV and have a long wash/wear life.
A DTF transfer is a design printed onto film using DTF ink. You use a heat source to apply the transfer to your material and create a finished product.
Where can I order DTF transfers?
You can order DTF transfers from a variety of vendors. I have used and recommend all of the vendors listed below. I do not use any particular Etsy seller. If you choose to use Etsy, be sure to read reviews of each shop. I like to read a variety of reviews to make sure all of my questions are answered.
If you have a DTF printer, you can print your own transfers. If not, order a bulk sheet and try out a few different projects.

How to print DTF transfers
Now that we’ve talked about what DTF is and how it works, let’s create a project.
For my project today I will be applying a DTF transfer to a shirt, but you can also apply it to a variety of other textile surfaces.
Used material:
Step 1: Prepare the blank
First, prepare the blank. You want to preheat the blank to remove wrinkles and moisture from the fabric.
Use the same temperature you use to press the DTF transfer. Your transfer should come with recommendations for time and temperature. If it doesn’t, a general rule is 325 degrees for 10-15 seconds. Since I use my EasyPress, I increase the time to 20 seconds.
You can adjust the time and press again if you find the DTF transfer does not stick well.

Step 2: Find DTF Transfer on the blank
Now we’ll add the DTF transfer to the blank. Use a ruler or t-shirt placement tool to place it exactly where you want it.
Because an EasyPress can move when pressed, use heat-resistant tape to hold the print in place. If you are using a regular heat press, the tape may not be necessary.

Step 3: Transfer the DTF print to the blank
Once the print is located, press the design for the recommended time and temperature.

Allow the DTF print to cool before peeling off the carrier sheet. You can speed up the cooling process by rubbing the surface with a DTF cooling block.
When the design has cooled, peel off the carrier sheet in one continuous motion.

Step 4: Reprint
After removing the carrier sheet, cover the print with an ironing cloth, or simply take the end of the t-shirt and place it over your design.

Press again for the recommended time and temperature. The second press completes the adhesion of the print and really works it into the fibers of the t-shirt!

After further processing your shirt is ready!
Avoid stretching the design or washing it for 24 hours. Follow the washing instructions recommended for your print type.

Frequently asked questions about DTF Print
Here are some common questions about DTF printing.
Which heat press can you use with DTF transfers?
For DTF transfers, you can use virtually any heat press. I’ve used an EasyPress, the Cricut Autopress, and a regular heat press.
You want an even temperature and pressure across the entire design. If your press is smaller than the design, you can press it in multiple passes.
Which blanks can you add DTF prints to?
I’ve tested a variety of different blanks and Cori from Hey, Let’s Make Stuff has tested a few others. We’ve found that DTF transfers work really well on porous surfaces like fabrics, tote bags, shirts, hats, and even wood.
It does not work well on hard surfaces like ceramic and glass. In our experience, it peels off of these hard surfaces like a sticker.
Do I recommend DTF printing?
I love the look of transferred DTF prints. They feel great and the ability to apply them to any type of fabric and in any color makes them a favorite.
Currently I order my DTF prints. Due to the cost and maintenance of DTF printers, I have decided to order my prints until the printers become more advanced.
Even without a DTF printer, I like the prints so much that I can’t stop using them.
I hope I answered all your questions about making DTF transfers. If you have any other questions, leave them in the comments and I’ll be happy to answer them for you.
